Vortex Brush (ref: 21023)

A 2.6m long 100mm diameter flexible filter brush . Ideal for round filter bays.

 

      

Spawning Brushes - Pack of 2 (ref: 21024)

Pack of 2 specially designed soft green spawning brushes each brush measures 1.5m by 140mm diameter.

Spawning is made easy with the help of these specially designed brushes. The breeding season is normally from April to July depending on the weather.

Place the brushes just below water level, one above the other, at edge of the pond
Encourages fish to spawn, usually in the early hours.
Spawning takes several hours with the eggs sticking to the brushes.
After spawning, separate the brushes from the broodfish to avoid the eggs being eaten.
Place the brushes in filtered water of the same temperature and the fry will hatch in 3-6days.
Small fish should be kept separate until they are large enough to be introduced to the pond.

Please Note: These spawning brushes are made from a soft material that won't harm your fish. DO NOT USE filter brushes for this purpose.     

Oase 'Y' 3 way hose adaptor (1 in - 2 out) (ref: 22020)

Oase 'Y' 3 Way hose adaptor (1 in - 2 out) . Both outlets are individually adjustable. 3/4" to 2" inlet and 1" to 1.1/2" outlets

Tradux - Wall and Liner Connector (ref: 22021)

This connector  can be used for water or cables offering a clean and secure seal.

Fits flexible hose up to 2"

RRP £ 21.49    OUR PRICE £ 16.75

Oase Flow Regulator 1.1/2" (ref: 22022)

Oase Flow Regulator 1.1/2" . For infinite adjustment of the water flow rate with 2 stepped hose adapters 1" to 1.1/2" .

R.R.P. £16.46   OUR PRICE £14.99

Solvent weld cement 25ml tube (ref: 24055)

Solvent weld cement 25ml tube

Solvent weld cement 240ml can with brush (ref: 24056)

Solvent weld cement 240ml can with brush

40mm Bottom Drain (ref: 24200)

40mm Bottom Drain

1.1/2" Bottom Drain (ref: 24201)

1.1/2" Bottom Drain

2" Bottom Drain (ref: 24202)

2" Bottom Drain

75mm Bottom Drain (ref: 24203)

75mm Bottom Drain

3" Bottom Drain (ref: 24204)

3" Bottom Drain

4" Bottom Drain with large sump (ref: 24205)

Application Gun for Sealant (ref: 25005)

Application Gun for Sealant

Swim Skim 25 Start (ref: 25048)

Skimmer , oxygenator and ice preventor in one, c/w pump ,10m cable and easy to empty waste basket.  Just place on your pond and plug in.
Maximum pond surface 25 sqm.

Pump 40w 2500 litres / hour

RRP £ 112.99       OUR PRICE £ 72.99

out of stock

Oase Aquaskim 40 (ref: 25049)

 Can be set for depths of between 300 and 800mm and will cope with a water level differential  of 160mm, which can occur during periods of heavy rainfall or strong evaporation. Supplied with  hosetail.

• Height adjustable from300mm to 800mm
• Ideal for the second inlet on the new Aquamax pumps

Oase BIOsys pond surface skimmer (ref: 25051)

Oase BIOsys pond surface skimmer. Placed at ground level with a flange that seals it to the pond liner this skimmer will remove floating debris from the water surface. Integral pump chamber will take Aquamax pump if required. Pump capacity 4000 to 16000 litres an hour.

• Water level differences of 100mm are handled.
• A 12 litre easily removable basket collects the debris. 
• Supplied with stone effect cover. 
• Requires 100 to 250 litres per minute water flow. 
• 5 year warranty
  

4" Bottom Drain (ref: 26206)

4" Bottom Drain

Niagara Waterfall 30cm (ref: 30100)

Stainless steel for wall or built in feature use.

30cm wide - 1" connection
7000 - 9000 litres / hour

R.R.P. £101.99  OUR PRICE £82.99

Niagara Waterfall 60cm (ref: 30101)

Stainless steel for wall or built in feature use.

60cm wide - 1" connection
10000 - 12000 litres / hour

R.R.P. £164.99  OUR PRICE £139.99

Koi ( OUT OF STOCK) (ref: 32669)

the 48 watt model will prove

,  later 

Blagdon PRDC 25 Litres Bio Filter Media (ref: 32697)

An excellent biological media for pond filtration systems supporting high fish stocking densities, this filter media has been specifically designed to provide a chemically inert, high surface area media with extreme porosity. It is also ideal for feeding regimes that are maximised for fish growth. Ideal for multi chamber filters, shower/trickle filters, box and pressure filter systems.

 

Carbon Filter Cartridge CB1-10C (ref: 40003)

CB1-10C carbon block cartridge, 10", 1 micron
Engineered using patented carbon extrusion techniques to create 1 micron nominal block, the CB1-10 provides a genuine balance between chlorine absorption and dirt loading. To maximise the life of this cartridge, pre-filtration is recommended.

Maximum life span 75,700 Litres /1660Gallons
Maximum Flow Rate 3.8 Litres per Minute

ONLY £10.99